 |
| |
Special notes |
| |
• |
This material is suitable for indoor and outdoor displays. |
| |
• |
No lamination is required; this means a convenient and low cost method
of producing. |
| |
• |
Cleanable with mild soap. |
| |
• |
There are different kinds of inks with different kind of properties.
Check first
whether the ink you use is suitable (e.g. Eco, Mild, etc.). |
|
| |
Special notes |
| |
• |
This material is suitable for indoor and outdoor displays.
|
| |
• |
No lamination is required; this means a convenient and low cost method
of producing. |
| |
• |
Cleanable with mild soap. |
| |
• |
There are different kinds of inks with different kind of properties.
Check first whether the ink you use is suitable (e.g. Eco, Mild, etc.). |
| |
Special notes |
| |
• |
This material is flame retardant B1. Is the used ink also flame-retardant?
|
|
|
• |
Be sure, that the final product reaches this standard! |
| |
• |
To protect the print against scratches and damage, it is recommended
that the media should be handled and used in a clean environment. |
| |
• |
It is not recommended to use a high pressure cleaner. |
|
• |
After printing let your print dry completely (1 hour) before getting
the image wet. |
| |
• |
When selecting print resolution and print quality (speed, banding) always
keep in mind the minimal viewing distance; a photo paper is normally seen from
30 cm and outdoor media is viewed from at least 2,5 meter. |
| |
• |
Place the grommets in the hemline along the length of the banner, so
the grommets are fixed on two layers. |
| |
• |
Place the grommets In the corner on the
four layers where the length and width hems cross. |
| |
• |
To increase the durability
when hung, reinforcement of the corners is recommended. |
| |
• |
The hem can be taped with industrial high tack tape. When stitching the
material, be careful not to scratch the printed (coated) side. A double hem and
a maximum of 2 stitched per centimetre is recommended. |
|
|
• |
Best method is to sew the banner material. Use of heat or glue can damage
the base material. |
| |
• |
Always make a practical test to make sure that the method of attachment
is reliable. |
| |
• |
Improper installation can damaged the banner. Use a professional installer. |
|
|
Banner
Blockout 510 |
|
|
| |
|
|
  |
| |
| |
|
|
• |
Display and banner quality |
|
• |
Blockout quality No showing through |
|
• |
Fire retardant B1 |
|
• |
Soft & delicate surface |
|
• |
Print side: matt white surface
|
|
• |
Flexible |
|
• |
Heavy weight |
|
• |
Weather resistant |
|
• |
UV-protected* |
|
• |
Seamable |
| |
|
|
Application |
|
• |
Billboard |
|
• |
Building murals |
|
• |
In store displays |
|
• |
In and outdoor flexible durable signs and banners
|
|
• |
Exhibitions and events |
|
• |
Shop and window displays |
|
• |
Prolonged presentations |
|
|
White smooth opaque substrate for both side displays. Banner with black
inner layer for zero light transmission. Both sides printable without
showing through. No ghosting! No shadows! Banner Blockout is fire
retardant B1 and applicable for billboard, banners, building murals
and in store displays Suitable for in and outdoor applications, printed
with UV pigment ink. Applicable up to 5 years.
Specifications
|
|
|
| Quality |
|
Polyestergewebe
mit beidseitiger PVC-Beschichtung |
| Weight |
|
510
g/m2 |
| Print side |
|
Matt white PVC |
| Reverse side |
|
Soft-PVC |
| Tearing strength |
|
WARP 15,8 |
| Iso 13937-1999 |
|
WEFT 16,0 |
| Tensile strength |
|
WARP 207,5 |
| Iso 13934-1999 |
|
WEFT 181,5 |
| Density |
|
Denier 1000 x 1000,
12 x 12 |
| Fire retardant |
|
B1 |
|
| |
Special notes |
| |
• |
This material is flame retardant B1. Is the used ink also flame-retardant?
Be sure, that the final product reaches this standard! |
| |
• |
To protect the print against scratches and damage, it is recommended
that the media should be handled and used in a clean environment. |
| |
• |
It is not recommended to use a high pressure cleaner. |
| |
• |
After printing let your print dry completely (1 hour) before getting
the image wet. |
| |
• |
When selecting print resolution and print quality (speed, banding) always
keep in mind the minimal viewing distance; a photo paper is normally seen from
30 cm and outdoor media is viewed from at least 2,5 meter. |
| |
• |
Place the grommets in the hemline along the length of the banner, so
the grommets are fixed on two layers. Place the grommets In the corner on the
four layers where the length and width hems cross. To increase the durability
when hung, reinforcement of the corners is recommended. |
| |
• |
The hem can be taped with industrial high tack tape. When stitching the
material, be careful not to scratch the printed (coated) side. A double hem and
a maximum of 2 stitched per centimetre is recommended. |
| |
• |
Best method is to sew the banner material. Use of heat or glue can damage
the base material. |
| |
• |
Always make a practical test to make sure that the method of attachment
is reliable. |
| |
• |
Improper installation can damaged the banner. Use a professional installer. |
|
Banner
340 |
|
|
| |
|
|
|
| |
| |
|
|
• |
Banner quality |
|
• |
Soft & delicate surface |
|
• |
Print side: matt white surface
|
|
• |
Flexible and lightweight |
|
• |
Weather resistant |
|
• |
UV-protected* |
|
• |
Seamable |
|
• |
Easy to clean with mild soap |
|
• |
Suitable for in and outdoor banners, printed with UV pigment ink. |
|
• |
Applicable up to 5 years |
| |
|
|
Application |
|
• |
In and outdoor flexible durable signs and banners |
|
• |
Exhibitions and events
|
|
• |
Shop and window displays |
|
• |
Prolonged presentations |
Special notes |
|
• |
see equivalent media information |
|
|
Flexible matt white banner material for in and outside front lit banner
applications. Banner 340 offers exceptional outdoor durability.
Specification
|
|
|
| Quality |
|
Polyester
weaving + both side PVC |
| Weight |
|
340
g/m2 |
| Print side |
|
Matt white Soft-PVC |
| Reverse side |
|
Soft-PVC |
| Tearing strength |
|
90 (L kgf/5cm) |
| ISO 13934-1 |
|
89 (W kgf/5cm) |
| Tensile strength |
|
7 (L kgf) |
| ISO 13937-2 |
|
5 (W kgf) |
| Density |
|
500
x 250 (Denier) |
|
|
Banner
440 |
|
|
| |
|
|
|
| |
| |
|
|
• |
For use in solvent based piezo printers |
|
• |
Display and banner quality |
|
• |
Fire retardant B1 |
|
• |
Weather resistant |
|
• |
UV-protected* |
|
• |
Seamable |
|
• |
Easy to clean with mild soap |
| |
|
|
Application |
|
• |
Billboard |
|
• |
Building murals |
|
• |
In store displays |
|
• |
In and outdoor flexible durable signs and banners |
|
• |
Exhibitions and events |
|
• |
Shop and window displays |
|
• |
Prolonged presentations |
|
|
White substrate for small and wide format front-lit displays. Banner
440 is fire retardant B1 and applicable for billboard, banners, building
murals and in store displays.
Specification
|
|
|
| Quality |
|
Polyester
weaving + both side PVC |
| Weight |
|
440
g/m2 |
| Print side |
|
Matt white Soft-PVC |
| Reverse side |
|
Soft-PVC |
| Tearing strength |
|
139 (L kgf/5cm) |
| ISO 13934-1 |
|
116,2 (W kgf/5cm) |
| Tensile strength |
|
11,4 (L kgf) |
| ISO 13937-2 |
|
15,5 (W kgf) |
| Density |
|
1000
x 1000 (Denier) |
| Fire retardant |
|
B1 (Din 4102-1) |
|
| |
Special notes |
| |
• |
This material is flame retardant B1. Is the used ink also flame-retardant?
Be sure, that the final product reaches this standard! |
| |
• |
Let your print dry completely (24 hour in evaporation room) for further
application. |
| |
• |
TEPEDE banner products are compatible with conventional banner finishing
methods, such as stitching, grommeting or thermal / high frequency welding. Be
very careful
with lightweight media such as 350 gram or less with thermal welding! |
| |
• |
Always make a practical test to make sure that the method of attachment
is reliable. |
| |
• |
Place the grommets in the hemline along the length of the banner, so
the grommets are fixed on two layers. |
| |
• |
Place the grommets in the corner on the
four layers
where the length and width hems cross. |
| |
• |
To increase the durability when hung, reinforcement of the corners is
recommended. |
| |
• |
The hem can be taped with industrial high tack tape. When stitching the
material, be careful not to scratch the printed (coated) side. A double hem and
a maximum
of 2 stitched per centimetre is recommended. |
| |
• |
Improper installation can damage the banner. Use a professional installer.
|
|
Banner
510 |
|
|
| |
|
|
|
| |
| |
|
|
• |
Banner quality |
|
• |
Display and banner quality |
|
• |
Fire retardant B1 |
|
• |
Soft & delicate surface |
|
• |
Print side: matt white surface
|
|
• |
Heavy weight but flexible
|
|
• |
Weather resistant |
|
• |
UV-protected* |
|
• |
Seamable |
| |
|
|
Application |
|
• |
Billboard |
|
• |
Building murals |
|
• |
In store displays |
|
• |
In and outdoor flexible durable signs and banners |
|
• |
Exhibitions and events
|
|
• |
Shop and window displays |
Special notes |
|
• |
see equivalent media information |
|
|
White substrate for small and wide format front-lit displays. Banner
510 is fire retardant B1 and applicable for billboard, banners, building
murals and in store displays.
Specification
|
|
|
| Quality |
|
Polyester
weaving + both side PVC |
| Weight |
|
510
g/m2 |
| Print side |
|
Matt white Soft-PVC |
| Reverse side |
|
Soft-PVC |
| Tearing strength |
|
202 (L kgf/5cm) |
| ISO 13934-1 |
|
180 (W kgf/5cm) |
| Tensile strength |
|
20,6 (L kgf) |
| ISO 13937-2 |
|
16 (W kgf) |
| Density |
|
1.000
x 1.000 (Denier) |
| Fire retardant |
|
B1 (DIN 4102-1) |
|
| |
Special notes |
| |
• |
Suitable for in and outdoor applications, printed with UV pigment ink. |
| |
• |
Applicable up to 5 years. |
| |
• |
This material is flame retardant B1. |
| |
• |
Is the used ink also flame-retardant? Be sure, that the final product
reaches
this standard! |
| |
• |
There are different kinds of inks with different kinds of properties.
When printing
with UV stable pigment ink it’s normal that the colours are different than
the dye inks. Refer to the TEPEDE compatibility list for information. |
| |
• |
It is not recommended to use a high pressure cleaner. |
| |
• |
Let your print dry completely (24 hour in evaporation room) for further
application. |
| |
• |
Always keep in mind the minimal viewing distance; a photo paper is normally
seen
from 30 cm and outdoor media is viewed from at least 2,5 meter. |
| |
• |
TEPEDE banner products are compatible with conventional banner finishing
methods,
such as stitching grommeting or thermal / high frequency welding. |
| |
• |
Be very careful with lightweight media such as 350 gram or less with
thermal
welding! |
| |
• |
Always make a practical test to make sure that the method of attachment
is reliable. |
| |
• |
Place the grommets in the hemline along the length of the banner, so
the grommets
are fixed on two layers. |
| |
• |
Place the grommets in the corner on the four layers where the length
and width
hems cross. |
| |
• |
To increase the durability when hung, reinforcement of the corners is
recommended. |
| |
• |
The hem can be taped with industrial high tack tape. When stitching the
material, be careful not to scratch the printed (coated) side. A double hem and
a maximum
of 2 stitched per centimetre is recommended. |
| |
• |
Improper installation can damage the banner. Use a professional installer. |
|
Canvas
Artist SB |
|
|
| |
|
|
|
| |
| |
|
|
• |
Matt natural white 100% Art Canvas |
|
• |
Solvent top coated, for vivid colors and sharp
edge definitions |
|
• |
Pre-Stretched quality |
|
• |
Blend of polyester and cotton yarns |
|
• |
Less sensitive to dimensional change from
weather conditions |
|
• |
Uniform in texture, and perfect stretchable |
|
• |
Mural and grand format rigid quality |
| |
|
|
Application |
|
• |
Murals |
|
• |
Grand formats |
|
• |
Digital fine arts |
|
• |
Digital photography |
|
• |
Reproductions |
|
• |
Exhibitions |
|
• |
Indoor banners |
|
|
Fine artist canvas quality, high-resolution solvent
inkjet coated. For murals, grand format, digital
fine art and photographic reproductions. Blend of polyester and cotton
yarns, which give a strong rigid and stretchable quality. Also for
grand formats! The natural structure and matt canvas gives the product
a real art realistic look and feeling. |
| |
Special notes |
| |
• |
Canvas Hera has a special inkjet coating that can be damaged
by excessive handling. Always handle the media by the edges. Use
cotton gloves to prevent fingerprints on the media. |
| |
• |
If you intend to apply a protective spray, allow your prints
to dry 24 hours more before doing so. |
| |
• |
Canvas Hera shows high resistance to fingerprints and water
when the plot is completely dry, but direct contact with water is
not
recommended. |
| |
• |
Avoid physical damage, such as creasing or folding especially
at corners and edges. |
| |
• |
Any loose threads should be removed before printing to prevent
contact with cartridges or other components. |
| |
• |
|
